Dr. Song – Jeng Huang            

 

Associate Professor, Ph.D.

 

Department of Mechanical Engineering

National Chung Cheng University


　

168, University Rd., Ming-Hsiung, Chia-Yi, 621
 TAIWAN, R.O.C.

 

 

TEL: 886-5-2720411-33307

FAX: 886-5-2724679, 2720589

E - mail: ime_hsj@ccu.edu.tw


　

Job Description:

Dr. Huang is working as a professor in one of the best national universities in Taiwan. His main works are: teaching, doing academic research and supervising graduate students.

 

bullet

Expertise


　

1.      Mechanics of Composite Materials and Sandwich Structure

　

2.      Processing of Micro- and Nano- Metal Matrix Composite Materials

3.      Optical Measurement: ESPI, Shearography

4.      Aerospace and Mechanical Engineering

5.      Experimental Mechanics

6.      Bio-Medical Engineering

　

bullet

 Education

　

1.      Doctor of Philosophy in Dynamics and Strength of Machine, Instrument and Apparatus (8/1997-3/2000) MATI-Russian State University of Technology, Moscow, Russia. Dissertation title: The Effect of Adhesive Layer of Sandwich   Structure on Its Strength

2.      Master of Science in Aerospace Engineering (9/1995 - 6/1997) Moscow State Aviation Technology University (MATI), Moscow, Russia

3.      Bachelor of Science in Aeronautical and Astronautical Engineering (9/1988 - 6/1992) National Cheng Kung University, Tainan, Taiwan

4.      Cheng Kung Senior High School in Taipei, Taiwan (9/1985 - 6/1988)

　

bullet

Employment and Experience

　

1.      Visiting Professor (6/2006-5/2007) School of Aeronautics and Astronautics, Purdue University, USA

2.      Assistant Professor (8/2000 – 8/2006) Department of Mechanical Engineering, National Chung Cheng University

3.      Psychological and Spiritual Assistant (8/1994 - 8/1995) Bible, Truth, Service Full - Time Training Center in Taipei

4.      Aircraft Electrical Maintenance Corporal (8/1992 - 6/1994) China Air-force and China Air-Force Military Academy 

　

bullet

Courses what Dr. Huang teaches

　

1.      Mechanics of Composite Materials

2.      Advanced Mechanics of Composite Materials

3.      Engineering Materials Science

4.      Materials Science of Mechanical Engineering

5.      Advanced Mechanics of Composite Materials

6.      Experimental Stress Analysis

7.      Material Experiment

8.      Optical Measurement (cooperative with other professors)

9.      Bio-MEMS System (cooperative with other professors)

10.  Bio-Mechanics (cooperative with other professors)

　

bullet

Honor and Award

　

1.      Excellent Aircraft Maintenance Corporal of China Air Force (1994)

　

2.      Governmental Scholarship to Study Abroad by Ministry of Education of R.O.C. (1995 - 1999)

3.      Diploma of the International Young Scientific Researcher Conference in Russia in 1998 

4.      Diploma of the International Young Scientific Researcher Conference in Russia in 1999

5.      Marquis Who’s Who in the World 2005-2007, 25-27 Ed.

6.      Marquis Who's Who in Science and Engineering, 2006-2007, 9th Ed.

7.      Marquis Who's Who of Emerging Leaders 2007, 1st Ed.

8.      Marquis Who's Who in Asia 2007, 1st Ed.

9.      The 44th Reward of National Science Council, ROC for Scientific and Technical Personnel Short-Term Overseas Research (9/2006-1/2007)

　

bullet

Research Abstract

      The topics of Dr. Huang’s present researches are:  Mechanics of Composite Materials and Sandwich Structures, Processing of Micro- and Nano-

      Composite Metal Matrix Materials, Optical Measurement (ESPI, Shearography), and Bio-Medical Engineering (Bio-chip optical detection, wear of total

       hip arthroplasty et al.).

       The following publications are results of his researches in the recent years:

　

bullet

Publications

　

Journal

 

1.          Huang, Song-Jeng, Kobelev V. N., August 31 – September 5, 1997, “Achieving the stress and displacement distribution law along the thickness of Sandwich Structure,” Second International Aerospace Congress, Moscow, Russia.

2.          Huang, Song-Jeng, Kobelev V. N., April 7-11, 1998, “Computing the technological and operating defect of adhesive layer in sandwich structure by calculating their strength,” the XXIV International Young Scientific Researcher Conference.

3.          Huang, Song-Jeng, Kobelev V. N., July 5-11, 1998, “Mathematical Model of Adhesive Laminae in Sandwich Structure,” Fifth international conference on composites engineering (ICCE/5), Las Vegas, USA, pp.393-394.

4.          Huang, Song-Jeng, Kobelev V. N., April 7-11, 1999, “Experimental Investigation of Adhesive Layer in Sandwich Structure of Flying Vehicle,” the XXV International Young Scientific Researcher Conference.

5.          Huang, Song-Jeng, Kobelev V. N., May 24-26, 1999 “Effect of Adhesive-jointed Layer in Sandwich Structure on its Strength,” Scientific-technical Conference of Young Specialist in GKNPS named after M.V.Hrunicheva.

6.          Huang, Song-Jeng, Kobelev V. N., July 5-9, 1999, “Stress-strain investigation of adhesive layer in sandwich structure of flying vehicle,” 12th International Conference on Composites Materials, Paris, France.

7.          Huang, Song-Jeng ,Wang, Wei-Shu and Wang, Wen-Yi, 22-23 Nov., 2001“Stress-Strain Study of Adhesive Layer in Sandwich Structure“, The 2001 Annual Conf. of the Chinese Soc. for Material Science, Taiwan ,ROC ,paper no. p04-07

8.          Huang, S.-J. and Lin, Yue-Chung, 22-23 March, 2002 “The Fracture Mechanics Modeling of Adhesive Layer in Composite Sandwich Structure with Aluminum Honeycomb Core“, The 2002 conference of Chinese Fracture Science, p.p.49.

9.          Huang, Song-Jeng, April 22-27, 2002, “The modeling investigation of adhesion of amorphous diamond coatings for total-hip arthroplasty.” 5th International Symposium on Diamond Films and Films of Related Materials.  Kharkov, Ukraine.

10.      Huang, Song-Jeng and Lin, Yue-Chung, July 1-6, 2002, “Fracture Analysis for Adhesive Layer of Composite Sandwich Beam,” Ninth international conference on composites engineering, San Diego (ICCE/9), USA, pp.307-308. NSC project no.: NSC 90-2212-E-194-037.

11.      Huang, Song-Jeng and Wang, Wei-Shu, December 28-30, 2002, “The Thermal Deformation Study of CVD Diamond Lead Bond Tool at High Temperature by Electronic Speckle Pattern Interferometry,” International Symposium on Experimental Mechanics, Taipei, Taiwan, R.O.C., paper code:275.

12.      Huang, Song-Jeng and Wang, Wen Yi, Jan. 21-23, 2003, “A Five – Layer Viscoelastic Model for Sandwich Beam,” Forth International Conference on Composite Science & Technology, ICCST/4, Durban, South Africa, pp. 288-296. NSC project no.: NSC 89-2218-E-194-037.

13.      Huang, Song-Jeng and Hu, Zi-Kai, Oct. 27-28, 2003, “Application and Investigation of Micro Electrophoresis on a Biochip Applied to Immunoassay,” 2003 Cross-Strait Conference on Science and Technology & Symposium of University Presidents, Ming-Hsiung, Chai-Yi, Taiwan, R.O.C., paper no. 127.

14.    Huang, Song-Jeng and Liu, Hsiao-Wei, Aug. 26-29, 2003, “Viscoelastic Analysis of Composite Sandwich Plate,” The 5th Chinese Aerospace Technology Conference, Si-An, China, P.O.C., accepted.

15.      Huang, Song-Jeng and Liu, Hsiao-Wei, Dec. 5-6, 2003 “Analysis of Composite Sandwich Plate with Viscoelastic Adhesive Layer,” The 20th National Conference on Mechanical Engineering (CSME), Taipei, Taiwan, paper no. C02-12 (10347).

16.      Song-Jeng Huang, Yue-Chung Lin and Zi-Kai Hu , Dec. 19, 2003, ”Fracture Analysis and Toughness Measurement of Adhesive Layer in Composite Sandwich Plate,” 2003 AASRC (Aeronautical and Astronautical Society of the Republic of China) / CCAS Joint Conference, Tainan, Taiwan, paper no. C1: (III) 2. NSC project no.: NSC90–2212–E–194-037; NSC 91-2212-E-194-041.

17.      Song-Jeng Huang, Wei-Shin Ju, Shaw-Ruey Lyu, April 22, 2004, “Wear Analysis of DLC Applied in Total Hip Arthroplasty” 2004 Conference on the Tribology and Material Technology, Yun-Lin, Taiwan, pp. 281-285.

NSC project no.: NSC 92-2622-E-194-007-CC3.

18.      Song-Jeng Huang and Hwa-Long Lin, June 7-10, 2004, “Electronic Specle Pattern Interferometry Applied to The Deformation Measurement of Sandwich Plated with Single ‘Fully Potted’ Insert,” 2004 SEM X International Congress & Exposition on Experimental and Applied Mechanics, Costa Mesa, CA, USA, paper no. 165. NSPO project no.: NSC91-NSPO(A)-PC-FA10-02.

19.      Song-Jeng Huang and Hsiao-Wei Liu, June 28–July 4, 2004, “A Five – Layer Viscoelastic Model for Sandwich Plate,”, 12th International Conference  On Methods Of Aerophysical Research, Akademgorodok, Novosibirsk, Russia, paper no. 36.

NSC project no.: NSC 89-2218-E-194-037.

20.      Song-Jeng Huang, Chih-Kai Hu, Ming-Chih Hsiao, Hung-Jen Yeh, Nov. 26-27, 2004, “Investigation of Micro Electrophoresis on a Biochip Detection System Applied to Immunoassay,” The 21st National Conference on Mechanical Engineering (CSME) Kaohsiung, Taiwan.

21.      Song-Jeng Huang, Lin-Wei Chiu, Ming Tse Kao, Dec. 11, 2004, “Structural Analysis of Sandwich Plates with Inserts – Five Layers Theory,” 2004 AASRC (Aeronautical and Astronautical Society of the Republic of China) / CCAS Joint Conference, Taichung, Taiwan.

22.      Song-Jeng Huang, Ken-Fu Liu, Yen-Fu Liu, Dec. 17-18, 2004, “A Wear Study of the Diamond Film Applied in Artificial Joint,” Biomedical Engineering Society 2004 Annual Symposium, Tainan, Taiwan.

23.      Song-Jeng Huang, Hwa-Long Lin, Nov.29 - Dec.1, 2004, “Electronic Speckle Pattern Interferometry Applied to the Displacement Measurement of Sandwich Plates with Double ‘Fully Potted’ Inserts,” The Third International Conference on Experimental Mechanics (ICEM2004) & The Third Asian Conference on Experimental Mechanics (ACEM3), Singapore, paper no. C05-6.

24.      A. S. Grabilnikov, Paul G. Wagstaff, Song-Jeng Huang, 1-5 March 2005, “International Co-operation in the Field of Russian Aerospace Education” 2005 iNEER Conference for Engineering Education and Research, Tainan, Taiwan, paper no. F63. [session chairman]

25.      Song-Jeng Huang, Lin-Wei Chiu, Oct. 24-26, 2005, “Structural Analysis of Sandwich Plates with Inserts Applied in Rocket– Five Layers Theory” Workshop of ITAM SB RAS – ASTRC NCKU Collaboration in Aerospace Sciences Results and Prospects, Sosnovka, Novosibirsk, Russia. NSC support no.: NSC 94-2911-I-006-019.

26.      Song-Jeng Huang, Yan-Fu Liu, Hung-Jen Yeh, Nov. 25-26, 2005, “The Out-of-Plane Strain Measurement of Digital Speckle Pattern Phase Shift Shearography on Sandwich Plates with Insert,” The 22nd National Conference on Mechanical Engineering (CSME), Jhongli City, Taoyuan County, Taiwan.

27.      Song-Jeng Huang, Yu-Tan Lin, Ming-Zi Hsiao, Dec. 10, 2005, “Digital Speckle Pattern Shearography Applied to the Out-of-Plane Strain Measurement in Sandwich Plates with Insert and Potting Materials,” 2005 AASRC (Aeronautical and Astronautical Society of the Republic of China) / CCAS Joint Conference, Gangshan, Taiwan, paper no. S02. [session chairman]

28.      Song-Jeng Huang, Yan-Fu Liu, Dec. 10, 2005, “The Adhesive Thickness Effect in Sandwich Beam on its Viscoelastic Property,” 2005 AASRC/CCAS Joint Conference, Gangshan, Taiwan, paper no. S13. [session chairman] NSC project no.: NSC 93-2212-E-194-010.

29.      Song-Jeng Huang, Chih-Yi Chen, Ming-Tse Kao, Dec. 16-17, 2005, “Processing of AZ91D/SiCp Magnesium Matrix composite,” The 29th National Conference on Theoretical and Applied Mechanics, Hsinchu, Taiwan, paper no. E029.NSC project no.: NSC 94-2218-E-194-009.

30.      2005 Song-Jeng Huang and Yan-Fu Liu, Oct.6, “Analysis of Effect of Adhesive Thickness in Sandwich Beam on its Viscoelastic Property”, First Taiwan-Russia Conference on Advanced Precious Manufacturing Technology, Chin Yun University, Jung-Li, Taiwan R.O.C. [invited talk]

31.      2006 Huang S-J, Jeng Y-R, Semenov V.I., Shuster L.Sh., Raab G.I., May 26-28, “Effect of Materials Microstructure and Their Adhesive Bondage Properties As Well As Friction Coefficient Value,” The 4th Conference on Precision Machinery and Manufacturing Technology－PMMT 2006, Ping-Tung , Taiwan. NSC Project No.：NSC-94-2212-E-132-003.

32.      2006 Song-Jeng Huang, Ming-Tse Kao, Yu-Liang Chen, Ti-Ching Hsieh, Nov. 24-25, “Fabrication of Mg-Al2O3p Particle Reinforced Composite Produced by Reciprocating Extrusion,” The 23rd National Conference on Mechanical Engineering (CSME), Tainan, Taiwan, paper no. D1-026. NSC Project No.: NSC 94-2218-E-194-009

33.      2006 Song-Jeng Huang, Hung-Jen Yeh, Yo-Zhi Dai, December 10, “Electronic Speckle Pattern Interferometry Applied to the Three-dimensional Displacement Measurement in Sandwich Plates with Insert and Potting Materials”, 2006 AASRC (Aeronautical and Astronautical Society of the Republic of China) / CCAS Joint Conference, Chung-Li, Taiwan, paper no. 02-19.

34.      2006 Song-Jeng Huang, Yung-Ming Chang, Chih-Hsien Yang, Dec. 15-16, “Investigation of Micro Blood Coagulation Bio-Chip” 2006 International Symposium on Biomedical Engineering, Taipei, Taiwan, paper no.10183.

35.      2006 Song-Jeng Huang, Ming-Zi Hsiao, Kai-Li Huang, December 15-16, “The Buckling Analysis of Sandwich Plates - Five Layers Theory” The 30th National Conference of Theoretical and Applied Mechanics, Changhwa, Taiwan, paper no. G010.

36.      2007 Song-Jeng Huang and Yan-Fu Liu, Jan. 3-8, “The Out-of-Plane Strain Measurement of Composite Sandwich Plate with Fully-Potted Insert Using Digital Phase-Shifting Shearography,” International Conference on Computational & Experimental Engineering and the Sciences (ICCES07), Miami, USA, paper no. ICCES0720061002226. [invited talk] [session chairman]

37.      2007 Song-Jeng Huang, Yeau-Ren Jeng, Ken-Fu Liu, April 15-19, “Bio-medical Applications of the Diamond-like Carbon Films on Alloy Substrate: a Wear Perspective,” 16th International Conference on WEAR OF MATERIALS (WOM), Montreal, Canada, paper no. P09.03.

38.      2007 Semenov V.I., Shuster L.Sh., Chertovskikh C.V., Jeng Y.-R., Huang S.-J., Dao Y.-Zh., Hwang S.-J., June 19-21, “Tribology of Composite Materials on the Basis of Magnesium Alloy with Powder Filler of SiC,” 10th International Conference on Tribology (SERBIATRIB'07), Kragujevac, Srbija, paper no. A03.

39.      2007 Song-Jeng Huang, Yu-Tan Lin, July 1-6, “The Out-of-Plane Strains Measurement in Sandwich Plates with Single Fully-Potted Insert by using Digital Speckle Pattern Shearography” 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece (Symposium: Novel Applications of Experimental Mechanics, paper no.91).

40.      2007 Song-Jeng Huang, Hung-Jen Yeh, July 1-6, “The Three-dimensional Displacement Measurement of Sandwich Circular Plates with a single fully-potted Insert using Electronic Speckle Pattern Interferometry,” 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece (Symposium: Digital Holography, paper no.470).

41.      2007 Song-Jeng Huang, October 12, “Present development of Russian Industry” 《Celebrative Seminar of establishment of Department of Slavic Language and Literatures》, Department of Slavic Language and Literatures, National Chengchi University, Taipei, Taiwan. [invited talk]

42.      2007 Song-Jeng Huang, Ming-Zi Hsiao, October 22-23, “Buckling Analysis of Sandwich Plate with Counting Adhesive Layers Effect” The 2nd Cross-Strait Conference on Experimental Mechanics, Tainan, Taiwan. [invited talk]

43.      2007 S.-J. Huang, M.-T. Kao, “Using Reciprocating Extrusion to Fabricate the Particulate Reinforced Mg-Al2O3p Magnesium Matrix Composites,” Taiwan-Russia-Singapore Trilateral Symposium, Cheng Shiu University, Kaohsiung, Taiwan. NSC Project No.：NSC 94-2218-E-194-009. [invited talk]

44.      2007 Song-Jeng Huang, Ming-Chih Hsiao, November 19-21, “Buckling Load Modeling of Structural Sandwich Plates: Five-Layer Theory,” 1st International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, Their Composites, Blends, IPNs and Gels: Macro to Nano Scales - 2007 (ICNP-2007), Kottayam, Kerala, India. [invited talk]

45.      2007 Song-Jeng  Huang, Y.-R. Jeng, S.-J. Hwang, Semenov V.I., Yo-Zhi Dai, Bo-Zhou Lin, December 21-22, “Study of tribology of AZ91D/SiCp metal matrix composites,” The 31st National Conference on Theoretical and Applied Mechanics, Dashu, Kaohsiung, Taiwan

46.      2007 Song-Jeng Huang, December 06, “Experience of My Studying in Russia”, Division of Alumni, Oversea Chinese and Foreign Students,《Seminar of Advance Studying and Studying Abroad 》. Teaching Excellence Project of National Chung Cheng University. [invited talk]

47.      2008 V.I. Semenov, L.Sh. Shuster, G.I. Raab, S.V. Chertovskich, S-J. Huang, "Titanium and copper microstructure and tribological parameters of contact with tool steel" 11th International Conference on Tribology (SERBIATRIB'08), Kragujevac, Srbija, paper no. BT-047.

48.      2008 Song-Jeng  Huang*, Shing-Ching Tsao, Sep. 25-27, “Mechanical Behavior, Processing and Characterization of Biocomposites,” International Conference on Advances in Polymer Technology (APT ’08), Kochi, Kerala, India, paper no.: INV 12. NSC project no.: 96-2221-E-194 -048 -. [invited lectures]

49.      2008 Song-Jeng  Huang*, Ti-Ching Hsieh, Bo-Zhou Lin and Pin-Sen Hong, Nov. 8-11, “Mechanical properties of composite sandwich plates containing magnesium matrix composite face sheets,” 2008 International Conference on Experimental Mechanics (ICEM2008), Nanjing, China, paper no.: ID 975. NSC project no.: 96-2923-E-194 -001 -MY3.

50.      2008 S.-J. Huang,Y.-R. Jeng, S.-J. Hwang, Semenov V.I., B.-Z. Lin, December 28-29, “A Study on the Tribology of Steel20 with the different Processing Method,” The 32nd National Conference on Theoretical and Applied Mechanics, Ming-Hsiung, Chia-Yi, Taiwan, paper no. F016. NSC project no.: 96-2923-E-194 -001 -MY3.

51.      2008 Song-Jeng Huang, Wen-Fu Chiou, Juan- kai Huang, December 28-29, “FEM analysis on the prediction of mechanical properties of Mg-Al2O3 particle reinforced composites from a representative volume element,” The 32nd National Conference on Theoretical and Applied Mechanics, Ming-Hsiung, Chia-Yi, Taiwan, paper no. G023. NSC project no.: 96-2923-E-194 -001 -MY3. [session chairman]

52.      2008 Song-Jeng  Huang*, Shing-Ching Tsao, December 28-29, “Processing of Biocomposites: an example of pineapple leaf fiberous composites,” The 32nd National Conference on Theoretical and Applied Mechanics, Ming-Hsiung, Chia-Yi, Taiwan, paper no. O015. NSC project no.: 96-2221-E-194-048.

53.   2009 Song-Jeng Huang*, Ti-Ching Hsieh, Po-Chou Lin, March 30-31, “Fabrication of AZ91D/SiCp magnesium matrix micro- and nano-composite materials and their mechanical properties,” NanoIsrael 2009, Jerusalem, Israel, paper no.: ID 433. NSC project no.: 95-2218-E-194-008.

54.   2009 Song-Jeng Huang, Pin-Sen Hong, July 26 – August 1, “Processing of magnesium metal-matrix composites and their mechanical properties after heat treatment,” The 3rd Cross-Strait Conference on Experimental Mechanics, Hohhot, Inner Mongolia, China, paper no.: ID 11. NSC project no.: 95-2218-E-194-008. [invited talk]

55.   2009 S.-J. Huang*, Y.-R. Jeng, Semenov V.I., Y.-Z. Dai, Sep. 21-26, “Mechanical Property of Magnesium Alloy Based Metal Matrix Composite Materials,” Congress on Nanotechnologies: BNM 2009, Ufa, Russia, paper no.: ID A028. NSC project no.: 95-2218-E-194-008.

56.   2009 Song-Jeng Huang*, Yeau-Ren Jeng, V.I. Semenov, Yo-Zhi Dai, Nov. 5, “Particle Size Effects of Silicon Carbide on Tribology of SiCp-Reinforced Magnesium Matrix Composites,” 2009 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, paper no.: ID 05. [invited talk]

57.   2009 Song-Jeng Huang, Ying-Ming Chang, Hon-Ming Fang*, Nov. 5, “The fabrication of T-shaped pump-less microfluidic biochips for coagulation test,” 2009 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, paper no.: ID 08. [invited talk]

58.   2009 Jyun-Jhih Luo, Song-Jeng Huang, Chin-Lung Yang, Dec. 11-12, “Portable Power-Saving Blood Coagulation Detection Devices for Remote Health Care Systems,” Biomedical Engineering Society 2009 Annual Symposium, National Yang-Ming University, Taipei, TAIWAN.

59.   2010 S.-J. Huang, Y.-R. Jeng, Semenov V.I., Y.-Z. Dai, Feb. 9-10, “Tribological Property of Magnesium Alloy Based Metal Matrix Composite Materials: Particle Size Effect Study” Regional Conference on Mechanical and Aerospace Technology 2010, Bali, Indonesia, paper no.: 412. NSC project no.: NSC95-2811–E–194–001.

60.   2010 Po-Chou Lin, Song-Jeng Huang*, Pin-Sen Hong, October 5-7, “Fabrication of magnesium metal matrix composites Al2O3p/AZ91D and their mechanical properties after heat treatment, ” 5th International Scientific and Technological Conference (Ther Tech Form’10), Nízke Tatry, Slovakia

61.   2010 Song-Jeng Huang*, Zhong-Wei Chen, October 5-7, “Microstructure and grain refinement of AlN particles reinforced AZ91D Mg-based metal matrix composites, ” 5th International Scientific and Technological Conference (Ther Tech Form’10), Nízke Tatry, Slovakia

　

bullet

Book and Technical Reportt

　

1.      Huang, Song-Jeng, “Russian Astronautical Industry” (in Chinese), 200 pages, Nan-Hon publishing Inc., 2000.

2.      Huang, Song-Jeng, Oct. 2001 "Stress-Strain Analysis and Moiré Interferometry Measurement of Adhesive Layers in Sandwich Plates", project report of National Science Council by contract no. NSC89-2218-E-194-037, 56 pages.

3.      Huang, Song-Jeng, May 2002 "Crack Analysis and Fracture Toughness Measurement for Adhesive Layers of Composite Sandwich Plate", project report of National Science Council by contract no. NSC90-2212-E-194-037, 47 pages.

4.      Huang, Song-Jeng, Sep. 2002 "The Strength Study of Potting／Insert Installed in Honeycomb Core Sandwich Composites Structure", mid-term project report of National Space Program Office by contract no. NSC91-NSPO (A)-PC-FA10-02, 46 pages.

5.      Huang, Song-Jeng, Apr. 2003 "The Strength Study of Potting／Insert Installed in Honeycomb Core Sandwich Composites Structure", final project report of National Space Program Office by contract no. NSC91-NSPO (A)-PC-FA10-02, 46 pages.

6.      Huang, Song-Jeng, Oct. 2003 "Crack Analysis and Fracture Toughness Measurement for Adhesive Layers of Composite Sandwich Plate", project report of National Science Council by contract no. NSC91-2212-E-194-041, 47 pages.

7.      Song-Jeng Huang, Aug. 2004 “Wear Study and Analysis of Diamond Films Applied in Total Hip Arthroplasty” project report of National Science Council by contract no. NSC92-2622-E-194-007-CC3, 120 pages.

8.      Song-Jeng Huang, Aug. 2005 “Viscoelastic Analysis for Adhesive Layer of Composite Sandwich Beam” project report of National Science Council by contract no.  NSC 93-2212-E-194-010, 90 pages.

9.      Y.W.Hung, T.K.Lin, S.J. Huang, W.H. Hsieh, M. S. Tsai, Aug. 2005 “Investigation of Micro Automated Blood Coagulation Analyzer Biochip” project report of Buddhist DalinTzu Chi General Hospital by contract no.  DTCRD 93-02, 24 pages.

10.  Song-Jeng Huang, May 2005 “Fabrication and design of new lightweight magnesium matrix composite materials and composite sandwich materials (1/3)” project report of National Science Council by contract no. NSC 93-2218-E-194-020, 9 pages.

11.  Song-Jeng Huang, May 2006 “Fabrication and design of new lightweight magnesium matrix composite materials and composite sandwich materials (2/3)” project report of National Science Council by contract no. NSC 94-2218-E-194-009, 60 pages.

12.  Song-Jeng Huang, May 2006 “Fabrication and design of new lightweight magnesium matrix composite materials and composite sandwich materials (3/3)” project report of National Science Council by contract no. NSC 95-2218-E-194-008, 80? pages.

  1. 黃崧任，「奈米顆粒金屬及金屬機複材的製造過程及使用時的接觸磨潤參數之研究(1/3)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC  96-2923-E-194-001-MY3，民國97年5月。
  2. 黃崧任，「生物複合材料的機械行為分析、製造與其特性化」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC 96-2221-E-194-048-，民國97年10月。

　

bullet

Patent

    

1.       W.H. Hsieh, M. S. Tsai, T.C. Chen, S.J. Huang, T.K.Lin, Y.W.Hung, 「METHOD AND DEVICE FOR MEASURING MATERIAL PROPERTIES」pending (Jan. 2007): 096100258 / Taiwan R.O.C.; pending (Sep. 2007): 11/902376 / USA.

2.       Song-Jeng Huang, Hui-Kan Hsu, Tang-Hao Chiang, 「HIGH HARDNESS MAGNESIUM ALLOY COMPOSITE MATERIAL」, pending (Jun. 2008): 97123518 / Taiwan R.O.C.; pending (July 2008): 200810133243.7 / China; pending (Jun. 2008):/ USA.

Project (Grant) 

　 1. National Science Council (NSC) 

　
　 　 　

Name of project

Principle Investigator (PI) or coPI

Duration

Supporter

執行情形

Budget, $NTD

血液凝固生物晶片之開發與應用(2/2)(100-2622-B-006-001-CC1)

coPI

2011/08/01 ~ 2012/07/31

NSC

已預核

2,075,000

人體硬組織複合材料的微觀力學分析:以牙齒琺瑯質為例(99-2221-E-194-016-)

PI

2010/08/01 ~ 2011/07/31

NSC

執行中

634,000

血液凝固生物晶片之開發與應用(1/2)(99-2622-B-006-002-CC1)

coPI

2010/08/01 ~ 2011/07/31

NSC

執行中

2,390,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－子計畫三：人體硬組織複合材料的微觀力學分析：以牙齒為例(II)(98-2221-E-194-003-)

PI

2009/08/01 ~ 2010/07/31

NSC

執行中

465,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－總計畫(II)(98-2221-E-194-002-)

coPI

2009/08/01 ~ 2010/10/31

NSC

執行中

1,155,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－子計畫三：人體硬組織複合材料的微觀力學分析：以牙齒為例(97-2221-E-194-066-)

PI

2008/08/01 ~ 2009/07/31

NSC

已結案

489,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－總計畫(97-2221-E-194-065-)

coPI

2008/08/01 ~ 2009/10/31

NSC

已結案

1,093,000

生物複合材料的機械行為分析、製造與其特性化(96-2221-E-194-048-)

PI

2007/08/01 ~ 2008/07/31

NSC

已結案

670,000

奈米顆粒金屬及金屬機複材的製造過程及使用時的接觸磨潤參數之研究(96-2923-E-194-001-MY3)

PI

2007/08/01 ~ 2010/07/31

NSC

執行中

1,366,000

病毒免疫生物晶片檢測系統之研究與運用–SARS及其它病毒之檢測－總計畫(3/3)(96-2221-E-194-054-)

coPI

2007/08/01 ~ 2008/07/31

NSC

已結案

736,000

病毒免疫生物晶片檢測系統之研發與運用–SARS及其它病毒之檢測－子計劃三: SARS微流體晶片之設計與製造(3/3)(96-2221-E-194-003-)

coPI

2007/08/01 ~ 2008/12/31

NSC

已結案

926,000

車身結構輕量化技術開發及安全性驗證－子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(3/3)(95-2218-E-194-008-)

PI

2006/08/01 ~ 2007/10/31

NSC

已結案

499,000

車身結構輕量化技術開發及安全性驗證－總計畫(3/3)(95-2218-E-194-005- )

coPI

2006/08/01 ~ 2007/12/31

NSC

已結案

1,484,000

病毒免疫生物晶片檢測系統之研究與運用–SARS及其它病毒之檢測－總計畫(2/3)(95-2221-E-194-046-)

coPI

2006/08/01 ~ 2007/07/31

NSC

已結案

851,000

病毒免疫生物晶片檢測系統之研發與運用–SARS及其它病毒之檢測－子計劃三: SARS微流體晶片之設計與製造(2/3)(95-2221-E-194-047-)

coPI

2006/08/01 ~ 2007/07/31

NSC

已結案

926,000

車身結構輕量化技術開發及安全性驗證－子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(2/3)(94-2218-E-194-009-)

PI

2005/08/01 ~ 2006/07/31

NSC

已結案

482,000

車身結構輕量化技術開發及安全性驗證－總計畫(2/3)(94-2218-E-194-006-)

coPI

2005/08/01 ~ 2006/07/31

NSC

已結案

1,196,000

病毒免疫生物晶片檢測系統之研究與運用–SARS及其它病毒之檢測－總計畫(1/3)(94-2213-E-194-047-)

coPI

2005/08/01 ~ 2006/07/31

NSC

已結案

1,052,000

病毒免疫生物晶片檢測系統之研發與運用–SARS及其它病毒之檢測－子計劃三: SARS微流體晶片之設計與製造(1/3)(94-2213-E-194-044-)

coPI

2005/08/01 ~ 2006/07/31

NSC

已結案

716,000

車身結構輕量化技術開發及安全性驗證－子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(1/3)(93-2218-E-194-020- )

PI

2004/08/01 ~ 2005/07/31

NSC

已結案

488,400

車身結構輕量化技術開發及安全性驗證－總計畫(1/3)(93-2218-E-194-017- )

coPI

2004/08/01 ~ 2005/07/31

NSC

已結案

1,894,800

複合夾心樑膠黏層的黏彈性質分析(93-2212-E-194-010- )

PI

2004/08/01 ~ 2005/07/31

NSC

已結案

454,800

鑽石薄膜應用於人工髖關節之磨耗分析與研究(92-2622-E-194-007-CC3)

PI

2003/06/01 ~ 2004/05/31

NSC

已結案

386,600

複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測(2/2)(91-2212-E-194-041- )

PI

2002/08/01 ~ 2003/07/31

NSC

已結案

788,500

複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測(1/2)(90-2212-E-194-037- )

PI

2001/08/01 ~ 2002/07/31

NSC

已結案

679,300

複合夾心板膠黏層的應力應變分析與其雲紋干涉之量測(89-2218-E-194-037- )

PI

2000/11/01 ~ 2001/07/31

NSC

已結案

477,000

 

　2. Other Supporter 

 

Name of project

Principle Investigator (PI) or coPI

Duration

Supporter

執行情形

Budget, $NTD

具微粒摻雜之鎂基複合材料的研發

PI

2009/08/01 ~ 2010/07/31

Sun-Moon-Star biochemistry and light materials Co.,Ltd.

執行中

540,000

美容用功能性合金的研發

PI

2009/08/01 ~ 2010/07/31

Sys Med Clinic

執行中

48,000

凝血及過敏生物晶片系統之開發

PI

2009/08/01 ~ 2010/07/31

eChem Solution Corp.

執行中

500,000

金屬上中下游競爭力提升輔導計畫-鎂合金無線網路販賣機殼蓋之模流分析

PI

2008/08/07 ~ 2008/11/30

Industrial Development Bureau, Ministry of Economic Affairs / Metal Industries Research & Development Centre / Saint Pin Technology CO., LTD.

已結案

480,000

微血液凝固分析晶片之研發

coPI

2004/02/01 ~ 2005/01/31

Dalin Tzu Chi General Hospital

已結案

194,000

襯套/扣件組裝於蜂巢複材結構之強度研究(NSPO(A)-PC-FA10-02)

PI

2002/03/16 ~ 2003/03/15

National Space Program Office

已結案

445,000

　

　

bullet

Language

　

1.      Russian – excellent in listening, writing and reading; good in speaking 

2.      English – excellent in listening, writing, reading; good in speaking

　

horizontal rule

中 文

 黃   崧   任 副教授 

Dr. Song - Jeng Huang

　

            目前服務單位：國立中正大學 機械工程學系

             聯絡方式：TEL: 886-5-2720411-33307   FAX: 886-5-2724679, 2720589 

             E-mail:  ime_hsj@ccu.edu.twime_hsj@ccu.edu.tw" ime_hsj@ccu.edu.tw

　

²        專業領域

1.      複合材料力學 和 三明治結構的設計製造

　

2.      微米及奈米金屬機複合材料製造

3.      光測實驗力學

4.      奈米鑽石薄膜

5.      生醫工程 （人工關節、生物晶片）

6.      機械工程與航空太空工程

²        開授過課程


　

  1. 複合材料力學

  2. 高等複合材料 (力學)

  3. 材料力學

  4. 高等材料力學

  5. 實驗應力分析

  6. 機械材料

  7. 工程材料

  8. 機械工程實驗（一）：材料實驗

  9. 材料與力學實驗

  10. 光學量測 （與他人合開）

  11. 機械工程概論（與他人合開）

  12. 生物機械力學（與他人合開）

  13. 生物微機電系統（與他人合開）

  14. 專題研討

  15. 固力專題研究（一）

　


　

 

²        學歷

1.      博士  (8/1997-3/2000) 俄羅斯國立科技大學(MATI)工程博士     

博士論文 : The Effect of Adhesive Layer of Sandwich Structure on it’s Strength

三明治結構膠黏層對其強度的效應

2.      碩士  ( 9/1995 - 6/1997 ) 莫斯科航空技術大學(MATI)航空太空工程碩士

3.      學士  ( 9/1988 - 6/1992 ) 國立成功大學航空太空工程學系學士

4.      高中  ( 9/1985 - 6/1988 ) 台北市市立成功高中

 

²        經歷

  1. 副教授( 8/2006 – 至今 )  國立中正大學 機械工程學系

  2. 「中華民國留俄台灣同學會」第一屆理事長 (06/2008-05/2010)

  3. 訪問教授(6/2006 – 5/2007 )  美國普度大學 航太學院

  4. 助理教授( 8/2000 – 8/2006 )  國立中正大學 機械工程學系

  5. 航空電子維修士官( 8/1992 – 6/1994 ) 空軍軍官學校 飛修大隊

　

　

²        優良事蹟

  1. 中華民國國科會95學年第44屆科學與技術人員國外短期研究補助 ( 9/2006-1/2007 )

  2. Marquis Who's Who in the World 2005-2008, 22nd -25th Ed.

  3. Marquis Who's Who in Science and Engineering, 2006-2008, 9th-10th Ed.

  4. Marquis Who's Who of Emerging Leaders 2007, 1st Ed.

  5. Marquis Who's Who in Asia 2007, 1st Ed.

  6. 俄羅斯優良國際青年科學研究家獎狀 ( 1999 )

  7. 俄羅斯優良國際青年科學研究家獎狀 ( 1998 )

  8. 中華民國政府公費留學獎學金 ( 1995 - 1999 )

  9. 中華民國傑出飛機維護士官 ( 1994 )

　

 

²        專業社團活動

  1. 中國航太學會/永久會員
  2. 中國機械工程學會/會員
  3. Society for Experimental Mechanics (SEM) / Member
  4. 台灣鎂合金協會/永久會員
  5. 2003中國航太學會學術研討會 / 論文發表主持人
  6. 2005 iNEER Conference for Engineering Education and Research / session chairman
  7. 2005中國航太學會學術研討會 / 論文發表主持人
  8. 2007International Conference on Computational & Experimental Engineering and the Sciences (ICCES07) / session chairman, Miami, USA
  9. 2007 International Congress on Thermal Stresses (7th ICTS) / Member of Program Committee, Taipei, TAIWAN
  10. 2007第三十一屆中華民國力學學會年會暨全國力學會議論文發表會/ 實驗力學學門論文發表主持人
  11. 2008第三十二屆中華民國力學學會年會暨全國力學會議論文發表會/ 籌備會副總幹事、秘書組組長
  12. 2008 International Conference on Advances in Polymer Technology (APT ’08), / International Advisory Committee, Cochin, INDIA

　

²        發表論文

 

期刊論文

    1. Huang, Song-Jeng, 2002, “Mathematical Modeling of the Stress-Strain State of Adhesive Layers in Sandwich Structures,” Mechanics of Composite Materials, Vol. 38, No. 2, pp. 103-120. (SCI Expanded, MSCI, EI)

    2. Huang, Song-Jeng and Wang, Wen Yi, 2002, “Viscoelastic Analysis for Adhesive Layer of Composite Sandwich Structure,” Transactions of the Aeronautical and Astronautical Society of ROC, Vol. 35, No. 2, pp. 135-151. (EI)

    3. Huang, Song-Jeng, 2003, “An Analytical Method for Calculating the Stress and Strain in Adhesive Layers in Sandwich Beams,” Composite Structures, Vol. 60, No. 1, pp. 105-114. (SCI, EI)

    4. Song-Jeng Huang and Hsiao-Wei Liu, 2003, “Viscoelastic Analysis for Adhesive Layer of Composite Sandwich Plates,” The Chinese Journal of Mechanics, Vol. 19, No. 2, pp. 57-68.

    5. Song-Jeng Huang and Yue-Chung Lin, 2004, “Fracture Analysis for Adhesively Bonded Sandwich Beam under Mode-I Loading,” Journal of Adhesion Science and Technology, Vol. 18, No. 7, pp. 833-847. (SCI, EI) NSC90–2212–E–194-037 and NSC91–2212–E–194 – 041.

    6. Song-Jeng Huang, Hwa-Long Lin, 2004, “Electronic Speckle Pattern Interferometry Applied to the Displacement Measurement of Sandwich Plates with Single ‘Fully Potted’ Insert,” Journal of Mechanics, Vol. 20, No. 4. pp. 273-276 (SCI expanded, EI) NSC91－NSPO(A)－PC－FA10－02.

    7. Song-Jeng Huang, Wei-Shin Ju and Shaw-Ruey Lyu, 2006, “Wear Analysis and Study of Diamond Film Applied in Total Hip Arthroplasty,” Journal of Medical and Biological Engineering, Vol. 26, No. 4, pp. 169-175. (EI) NSC 92-2622-E-194-007-CC3.

    8. Song-Jeng Huang, Hwa-Long Lin and Hsiao-Wei Liu, 2007, “Electronic Speckle Pattern Interferometry Applied to Displacement Measurement on Sandwich Plates with Two ‘Fully Potted’ Inserts,” Composite Structures, Vol. 79, No. 2, pp. 157-162. (SCI, EI) NSC91－NSPO(A)－PC－FA10－02.

    9. Song-Jeng Huang and Yan-Fu Liu, 2007, “The Adhesive Thickness Effect in Sandwich Beam on its Viscoelastic Property by Using Five Layers Theory,” Transactions of the Aeronautical and Astronautical Society of ROC, Series A: Journal of Aeronautics, Astronautics and Aviation, Vol. 39, No. 1, pp. 019-028. (EI) NSC 93－2212－E－194－010.

    10. Song-Jeng Huang*, Yeau-Ren Jeng, Ken-Fu Liu, 2007, “Sliding Wear Characteristics of the Diamond-like Carbon Films on Alloy Substrates,” Wear, Vol. 263, pp. 1266-1273. (SCI, EI)

    11. Semenov V.I. *, Shuster L.Sh., Chertovskikh C.V., Jeng Y.-R., Huang S.-J., Dao Y.-Zh., Hwang S.-J. , 2007, “Tribology of composite materials on the basis of magnesium alloy with powder filler of SiC,” Tribology in Industry, Vol. 29 No.1-2, pp. 37-40.

    12. Song-Jeng Huang*, Yu-Tan Lin, 2008, “Out-of-Plane Strains Measurement in Sandwich Plates with Single Fully-potted Insert by using Digital Shearography,” Strain, Vol. 44, Issue 3, pp.253-258. (SCI, EI)

    13. Song-Jeng Huang*, Hung-Jen Yeh, 2008, “Electronic Speckle Pattern Interferometry Applied for Three-dimensional Displacement Measurement of a Sandwich Plate Containing a Fully-potted Insert,” Journal of Strain Analysis for Engineering Design, Vol. 43, Issue 7, pp.645-653.  (SCI, EI)

    14. Song-Jeng Huang*, Yan-Fu Liu, 2009, “Slope of the Out of Plane Deflection Measurement of Composite Sandwich Plate with a Fully-Potted Insert by Using Digital Phase-Shifting Shearography,” Strain, accepted. (SCI, EI)

    15. Song-Jeng Huang*, Lin-Wei Chiu, 2009, “Structural Analysis of Sandwich Plates with Inserts – Five Layers Theory,” Computer Modeling in Engineering & Sciences, Vol. 615, no.1, pp.1-24. (SCI, EI)

    16. V.I. Semenov*, J.-R. Jeng, S.-J. Huang, L. Sh. Shuster, S.V. Chertovskikh, J.-Zh. Dao, P.-Ch. Lin, S.-J. Hwang 2009, “Behavior of the Magnesium Alloy AZ91D, Strengthened by SiC and Severe Plastic Deformation in Elastic Tribological Contact,” Journal of Friction and Wear, Vol. 30. No.3. pp. 194-198 (Russian Version: Trenie i Iznos, 2009,Vol. 30, No. 3, pp. 269–274).

    17. Song-Jeng Huang*, Yo-Zhi Dai, Yeau-Ren Jeng.2010 “Volume Fraction Effects of Silicon Carbide on the Wear Behavior of SiCp-Reinforced Magnesium Matrix Composites” Advanced Materials Research, accepted. (EI)

　

Paper revised

  1. 2010 Song-Jeng Huang*, Yeau-Ren Jeng, V.I. Semenov, Yo-Zhi Dai, “Particle Size Effects of Silicon Carbide on Wear Behavior of SiCp-Reinforced Magnesium Matrix Composites,” Tribology Letters, revised. (SCI) [Rank Factor: 16/116, Impact Factor 1.664]

  2. 2010 Song-Jeng Huang, Zhong-Wei Chen, “Microstructure of AlN particles reinforced AZ91D Mg-based metal-matrix composites,” Acta Mellallurgica Slovaca, Vol. 16, No. x, pp. xx-xx, revised. (Scopus)

  3. 2010 Po-Chou Lin, Song-Jeng Huang, Pin-Sen Hong, “Fabrication of magnesium metal matrix composites Al2O3/AZ91D and their mechanical properties after heat treatment,” Acta Mellallurgica Slovaca, Vol. 16, No. x, pp. xx-xx, revised. (Scopus)

  4. 2010 Oksana Velgosova*, Michal Besterci, Pritt Kulu, Song-Jeng Huang, “Effect of strain rate, volume fraction and temperature on fracture mechanism of the dispersion strengthened Al-Al4C3 system,” Materials Design, revised. (SCI expanded, IF: 1.518) [Rank Factor: 80/214, Impact Factor 1.518]

  5. 2011 Song-Jeng Huang, Semenov V.I. *, Shuster L.Sh., Lin P.-Ch., “Tribological properties of the low-carbon steels with different micro-structure,” Wear, revised. (SCI, EI) [Rank Factor: 13/116, Impact Factor 1.771]

　

Paper submitted for review:

    1. Semenov V.I., Shuster L.Sh., Chertovskikh S.V., Jeng Y.-R., Huang S.-J., Dai Y.-Zh., Lin P.-Ch., Hwang S.-J., 2009, “Behavior of the magnesium alloy AZ91D, strengthened by SiC and severe plastic deformation in elastic tribological contact,” Wear, submitted. (SCI, EI)

    2. V.I. Semenov, L. Sh. Shuster, S.-J. Huang, P.-Ch. Lin, 2009, “Tribological Properties of the Low-Carbon Steel against the Structural State,” Wear, submitted. (SCI, EI)

    3. V.I. Semenov, L. Sh. Shuster, Y.-R. Jeng, S.-J. Huang, S.V. Chertovskikh, 2009, “Complex Parameter of Plastic Frictional Contact as a Shear Strength Property of Adhesive Bonds,” Tribology Letters, submitted. (SCI)

    4. V.I. Semenov, L. Sh. Shuster, S.V. Chertovskikh, S-J Huang, 2009, “Effect of Microstructure on Parameters of Plastic Frictional Contact,” Materials Engineering A, submitted.

    5. 2010 Song-Jeng Huang, Zhong-Wei Chen, “Grain refinement of AlNp/ AZ91D megnesium metal-matrix composites,” Kovove Materialy / Metallic Materials, Vol. xx, No. x, pp. xx-xx, submitted. (SCI expanded, IF: 1.121 for 2008)

    6. 2010 V.I. Semenov*, L. Sh. Shuster, Y.-R. Jeng, S.-J. Huang, S.V. Chertovskikh, “Complex Parameter of Plastic Frictional Contact as a Shear Strength Property of Adhesive Bonds,” Tribology Letters, submitted. (SCI)
    7. 2010 V.I. Semenov*, L. Sh. Shuster, S.V. Chertovskikh, S-J Huang, “Effect of Microstructure on Parameters of Plastic Frictional Contact,” Materials Engineering A, submitted.

　

　

 

 

研討會論文

  1. 1997 Huang, Song-Jeng, Kobelev V. N., August 31 – September 5, “Achieving the stress and displacement distribution law along the thickness of Sandwich Structure,” Second International Aerospace Congress, Moscow, Russia.

  2. 1998 Huang, Song-Jeng, Kobelev V. N., April 7-11, “Computing the technological and operating defect of adhesive layer in sandwich structure by calculating their strength,” the XXIV International Young Scientific Researcher Conference.

  3. 1998 Huang, Song-Jeng, Kobelev V. N., July 5-11, “Mathematical Model of Adhesive Laminae in Sandwich Structure,” Fifth international conference on composites engineering (ICCE/5), Las Vegas, USA, pp.393-394.

  4. 1999 Huang, Song-Jeng, Kobelev V. N., April 7-11, “Experimental Investigation of Adhesive Layer in Sandwich Structure of Flying Vehicle,” the XXV International Young Scientific Researcher Conference.

  5. 1999 Huang, Song-Jeng, Kobelev V. N., May 24-26, “Effect of Adhesive-jointed Layer in Sandwich Structure on its Strength,” Scientific-technical Conference of Young Specialist in GKNPS named after M.V. Hrunicheva.

  6. 1999 Huang, Song-Jeng, Kobelev V. N., July 5-9, “Stress-strain investigation of adhesive layer in sandwich structure of flying vehicle,”, 12th International Conference on Composites Materials, Paris, France.

  7. 2001 Huang, Song-Jeng ,Wang, Wei-Shu and Wang, Wen-Yi, 22-23 Nov., “Stress-Strain Study of Adhesive Layer in Sandwich Structure“, The 2001 Annual Conf. of the Chinese Soc. for Material Science, Taiwan, ROC, paper no. p04-07

  8. 2002黃崧任，林雲志,, 22-23 March, “含蜂巢式鋁合金心材的複合夾心板膠黏層之破裂力學分析”,2002年中國破壞科學研討會, pp.49.

  9. 2002 Huang, Song-Jeng, April 22-27, “The modeling investigation of adhesion of amorphous diamond coatings for total-hip arthroplasty.” 5th International Symposium on Diamond Films and Films of Related Materials.  Kharkov, Ukraine.

  10. 2002 Huang, Song-Jeng and Lin, Yue-Chung , July 1-6, “Fracture Analysis for Adhesive Layer of Composite Sandwich Beam,” Ninth international conference on composites engineering, San Diego (ICCE/9), USA, pp.307-308. 國科會計畫編號: NSC 90-2212-E-194-037.

  11. 2002 Huang, Song-Jeng and Wang, Wei-Shu, December 28-30, “The Thermal Deformation Study of CVD Diamond Lead Bond Tool at High Temperature by Electronic Speckle Pattern Interferometry,” International Symposium on Experimental Mechanics, Taipei, Taiwan, R.O.C., paper code:275.

  12. 2003 Huang, Song-Jeng and Wang, Wen Yi, Jan. 21-23, “A Five – Layer Viscoelastic Model for Sandwich Beam,” Forth International Conference on Composite Science & Technology, ICCST/4, Durban, South Africa, pp. 288-296. 國科會計畫編號: NSC 89-2218-E-194-037.

  13. 2003 Huang, Song-Jeng and Hu, Zi-Kai, Oct. 27-28, “Application and Investigation of Micro Electrophoresis on a Biochip Applied to Immunoassay,” 第三屆海峽兩岸科學技術學術研討會, Ming-Hsiung, Chai-Yi, Taiwan, R.O.C., paper no. 127.

  14. 2003 Huang, Song-Jeng and Liu, Hsiao-Wei, Aug. 26-29, “Viscoelastic analysis of composite sandwich plate,” 第五屆海內外華人航太科技研討會, Si-An, China, P.O.C., accepted.

  15. 2003黃崧任, 劉孝偉, Dec. 5-6, “含黏彈性膠黏層之複合三明治平板分析,” 第二十屆機械工程研討會, Taipei, Taiwan, paper no. C02-12 (10347).

  16. 2003 黃崧任, 林雲志, 胡志凱, Dec. 19, ”複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測,” 2003 年中國航空太空學會/中華民用航空學會學術研討會, Tainan, Taiwan, paper no. C1: (III) 2. 國科會計畫編號: NSC90–2212–E–194-037; NSC 91-2212-E-194-041.

  17. 2004 Song-Jeng Huang, Wei-Shin Ju, Shaw-Ruey Lyu, April 22, “Wear Analysis of DLC Applied in Total Hip Arthroplasty” 磨潤暨材料科技研討, Yun-Lin, Taiwan, pp. 281-285.國科會計畫編號: NSC 92-2622-E-194-007-CC3.

  18. 2004 Song-Jeng Huang and Hwa-Long Lin, June 7-10, “Electronic Specle Pattern Interferometry Applied to The Deformation Measurement of Sandwich Plated with Single ‘Fully Potted’ Insert,” 2004 SEM X International Congress & Exposition on Experimental and Applied Mechanics, Costa Mesa, CA, USA, paper no. 165. 行政院太空計畫室計畫編號:NSC91-NSPO(A)-PC-FA10-02.

  19. 2004 Song-Jeng Huang and Hsiao-Wei Liu, June 28–July 4, “A Five – Layer Viscoelastic Model for Sandwich Plate,”, 12th International Conference  On Methods Of Aerophysical Research, Akademgorodok, Novosibirsk, Russia, paper no. 36.

  20. 國科會計畫編號: NSC 89-2218-E-194-037.

  21. 2004黃崧任, 胡志凱, 蕭銘志, 葉宏仁, Nov. 26-27, “微電泳生物晶片檢測系統於免疫檢測之應用與研究,” 第二十一屆機械工程研討會, Kaohsiung, Taiwan.

  22. 2004 黃崧任, 邱林威, 高銘澤, Dec. 11, “含扣件三明治板的結構力學分析-五層理論法,” 2004中國航太學會/中華民航學會聯合學術研討會, Taichung, Taiwan.

  23. 2004 黃崧任, 劉耿甫, 劉彥甫, Dec. 17-18, “鑽石薄膜應用於人工關節之磨耗研究,” 九十三年生物醫學工程科技研討會, Tainan, Taiwan.

  24. 2004 Song-Jeng Huang, Hwa-Long Lin, Nov.29 - Dec.1, “Electronic Speckle Pattern Interferometry Applied to the Displacement Measurement of Sandwich Plates with Double ‘Fully Potted’ Inserts,” The Third International Conference on Experimental Mechanics (ICEM2004) & The Third Asian Conference on Experimental Mechanics (ACEM3), Singapore, paper no. C05-6.

  25. 2005 A. S. Grabilnikov, Paul G. Wagstaff, Song-Jeng Huang, 1-5 March  “International Co-operation in the Field of Russian Aerospace Education” 2005 iNEER Conference for Engineering Education and Research, Tainan, Taiwan, paper no. F63. [session chairman]

  26. 2005 Song-Jeng Huang, Lin-Wei Chiu, Oct. 24-26, “Structural Analysis of Sandwich Plates with Inserts Applied in Rocket– Five Layers Theory” Workshop of ITAM SB RAS – ASTRC NCKU Collaboration in Aerospace Sciences Results and Prospects, Sosnovka, Novosibirsk, Russia. 國科會補助編號: NSC 94-2911-I-006-019.

  27. 2005 黃崧任, 劉彥甫,葉宏仁, Nov. 25-26, “數位相移剪像術應用於含襯套/扣件組裝於三明治蜂巢板之面外應變場研究,” 中國機械工程學會第二十二屆全國學術研討會, Jhongli City, Taoyuan County, Taiwan.

  28. 2005 黃崧任, 林鈺棠, 蕭銘志, Dec. 10, “數位斑點剪像術應用於含襯套/扣件三明治蜂巢板之面外應變場研究,” 2005中國航太學會/中華民航學會聯合學術研討會, Gangshan, Taiwan, paper no. S02. [session chairman]

  29. 2005 Song-Jeng Huang, Yan-Fu Liu, Dec. 10, “The Adhesive Thickness Effect in Sandwich Beam on its Viscoelastic Property,” 2005 AASRC/CCAS Joint Conference (2005中國航太學會/中華民航學會聯合學術研討會) , Gangshan, Taiwan, paper no. S13. [session chairman]

  30. 國科會計畫編號: NSC 93-2212-E-194-010.

  31. 2005黃崧任, 陳志亦, 高銘澤, Dec.. 16-17, “鎂基複合材料AZ91D / SiCp製備之研究,” 第二十九屆全國力學會議, Hsinchu, Taiwan, paper no. E029.

  32. 國科會計畫編號: NSC 94-2218-E-194-009.

  33. 2005 Song-Jeng Huang and Yan-Fu Liu, Oct.6, “Analysis of Effect of Adhesive Thickness in Sandwich Beam on its Viscoelastic Property”, First Taiwan-Russia Conference on Advanced Precious Manufacturing Technology, Chin Yun University, Jung-Li, Taiwan R.O.C. [invited talk]

  34. 2006 Huang S-J, Jeng Y-R, Semenov V.I., Shuster L.Sh., Raab G.I., May 26-28, “Effect of Materials Microstructure and Their Adhesive Bondage Properties As Well As Friction Coefficient Value,” The 4th Conference on Precision Machinery and Manufacturing Technology－PMMT 2006, Ping-Tung , Taiwan. NSC Project No.：NSC-94-2212-E-132-003.

  35. 2006 黃崧任,高銘澤,陳育良,謝狄青, Nov. 24-25, “利用往復式擠型製備氧化鋁顆粒強化之鎂基複合材料的研究,” 中國機械工程學會第二十三屆全國學術研討會, Tainan, Taiwan, paper no. D1-026. 國科會計畫編號：NSC 94-2218-E-194-009

  36. 2006 黃崧任,葉宏仁,戴有志, December 10, “電子斑點干涉術應用於含襯套/扣件三明治蜂巢板之三維位移場研究”, 2006 航太學會/民航學會聯合學術研討會, Chung-Li, Taiwan, paper no. 02-19.

  37. 2006 黃崧任, 楊志賢, 張詠銘, Dec. 15-16, “微血液凝血生物晶片之研究” 2006生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, Taipei, Taiwan, paper no. 10183.

  38. 2006 黃崧任,蕭銘志,黃凱豊, December 15-16, “三明治板的挫屈分析-五層理論法” 中華民國力學學會第三十屆全國力學會議, Changhwa, Taiwan, paper no. G010.

  39. 2007 Song-Jeng Huang and Yan-Fu Liu, Jan. 3-8, “The Out-of-Plane Strain Measurement of Composite Sandwich Plate with Fully-Potted Insert Using Digital Phase-Shifting Shearography,” International Conference on Computational & Experimental Engineering and the Sciences (ICCES07), Miami, USA, paper no. ICCES0720061002226. [invited talk] [session chairman]

  40. 2007 Song-Jeng Huang, Yeau-Ren Jeng, Ken-Fu Liu, April 15-19, “Bio-medical Applications of the Diamond-like Carbon Films on Alloy Substrate: a Wear Perspective,” 16th International Conference on WEAR OF MATERIALS (WOM), Montreal, Canada, paper no. P09.03.

  41. 2007 Semenov V.I., Shuster L.Sh., Chertovskikh C.V., Jeng Y.-R., Huang S.-J., Dao Y.-Zh., Hwang S.-J., June 19-21, “Tribology of Composite Materials on the Basis of Magnesium Alloy with Powder Filler of SiC,” 10th International Conference on Tribology (SERBIATRIB'07), Kragujevac, Srbija, paper no. A03.

  42. 2007 Song-Jeng Huang, Yu-Tan Lin, July 1-6, “The Out-of-Plane Strains Measurement in Sandwich Plates with Single Fully-Potted Insert by using Digital Speckle Pattern Shearography” 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece (Symposium: Novel Applications of Experimental Mechanics, paper no.91).

  43. 2007 Song-Jeng Huang, Hung-Jen Yeh, July 1-6, “The Three-dimensional Displacement Measurement of Sandwich Circular Plates with a single fully-potted Insert using Electronic Speckle Pattern Interferometry,” 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece (Symposium: Digital Holography, paper no.470).

  44. 2007 黃崧任, October 12, “俄羅斯工業發展現況”國立政治大學斯拉夫語文學系《慶祝斯拉夫語文學系成立座談會》 . [invited talk]

  45. 2007 黃崧任,蕭銘志, October 22-23, “複合夾心板含膠黏層的挫屈分析” 第二屆海峽兩岸實驗力學研討會, Tainan, Taiwan.

  46. 2007 S.-J. Huang, M.-T. Kao, “Using Reciprocating Extrusion to Fabricate the Particulate Reinforced Mg-Al2O3p Magnesium Matrix Composites,” 2007 Taiwan-Russia-Singapore Trilateral Symposium, Cheng Shiu University, Kaohsiung, Taiwan. 國科會計畫編號：NSC 94-2218-E-194-009. [invited talk]

  47. 2007 Song-Jeng Huang, Ming-Chih Hsiao, November 19-21, “Buckling Load Modeling of Structural Sandwich Plates: Five-Layer Theory,” 1st International Conference on Natural Polymers, Bio-Polymers, Bio-Materials, Their Composites, Blends, IPNs and Gels: Macro to Nano Scales - 2007 (ICNP-2007), Kottayam, Kerala, India. [invited talk]

  48. 2007 黃崧任, 鄭友仁, 黃社振, Semenov V.I., 戴有志, 林柏州, December 21-22, “鎂基複合材料AZ91D/SiCp之磨耗研究,” 中華民國力學學會第三十一屆全國力學會議, Dashu, Kaohsiung, Taiwan

  49. 2007 黃崧任, December 06, “留學俄羅斯經驗分享”, 國立中正大學畢僑外組《升留學講座》. 國立中正大學教學卓越計畫. [invited talk]

  50. 2008 V.I. Semenov, L.Sh. Shuster, G.I. Raab, S.V. Chertovskich, S-J. Huang, "Titanium and copper microstructure and tribological parameters of contact with tool steel" 11th International Conference on Tribology (SERBIATRIB'08), Kragujevac, Srbija, paper no. BT-047.

  51. 2008 Song-Jeng  Huang*, Shing-Ching Tsao, Sep. 25-27, “Mechanical Behavior, Processing and Characterization of Biocomposites,” International Conference on Advances in Polymer Technology (APT ’08), Kochi, Kerala, India, paper no.: INV 12. NSC project no.: 96-2221-E-194 -048 -. [invited lectures]

  52. 2008 Song-Jeng  Huang*, Ti-Ching Hsieh, Bo-Zhou Lin and Pin-Sen Hong, Nov. 8-11, “Mechanical properties of composite sandwich plates containing magnesium matrix composite face sheets,” 2008 International Conference on Experimental Mechanics (ICEM2008), Nanjing, China, paper no.: ID 975. NSC project no.: 96-2923-E-194 -001 -MY3.

  53. 2008黃崧任*,鄭友仁,黃社振,Semenov V.I., 林柏州, December 28-29, “對Steel20不同的加工方式之磨耗研究,” 中華民國力學學會第三十二屆全國力學會議, Ming-Hsiung, Chia-Yi, Taiwan, paper no. F016. NSC project no.: 96-2923-E-194 -001 -MY3.

  54. 2008 黃崧任*,邱文甫,黃俊凱, December 28-29, “以RVE預測氧化鋁顆粒強化之鎂基複合材料機械性質之有限元素分析,” 中華民國力學學會第三十二屆全國力學會議, Ming-Hsiung, Chia-Yi, Taiwan, paper no. G023. NSC project no.: 96-2923-E-194 -001 -MY3. [session chairman]

  55. 2008 黃崧任*, 曹興景, December 28-29, “生物複合材料的製作：以鳳梨纖維為例,” 中華民國力學學會第三十二屆全國力學會議, Ming-Hsiung, Chia-Yi, Taiwan, paper no. O015. NSC project no.: 96-2221-E-194-048.

  56. 2009 Song-Jeng Huang*, Ti-Ching Hsieh, Po-Chou Lin, March 30-31, “Fabrication of AZ91D/SiCp magnesium matrix micro- and nano-composite materials and their mechanical properties,” NanoIsrael 2009, Jerusalem, Israel, paper no.: ID 433. NSC project no.: 95-2218-E-194-008.

  57. 2009 黃崧任*、洪品森, July 26 – August 1, “鎂基複合材料的製備及其熱處理後機械性質之研究,” 第三届“二十一世纪的实验力学学科发展—海峡两岸实验力学研讨会,” 内蒙古呼和浩特, paper no.: ID 11. NSC project no.: 95-2218-E-194-008.

  58. 2009 S.-J. Huang*, Y.-R. Jeng, Semenov V.I.,Y.-Z. Dai, Sep. 21-26, “Mechanical Property of Magnesium Alloy Based Metal Matrix Composite Materials,” Congress on Nanotechnologies: BNM 2009, Ufa, Russia, paper no.: ID A028. NSC project no.: 95-2218-E-194-008.

  59. 2009 Song-Jeng Huang*, Yeau-Ren Jeng, V.I. Semenov, Yo-Zhi Dai, Nov. 5, “Particle Size Effects of Silicon Carbide on Tribology of SiCp-Reinforced Magnesium Matrix Composites,” 2009 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, paper no.: ID 05. [invited talk]

  60. 2009 Song-Jeng Huang, Ying-Ming Chang, Hon-Ming Fang*, Nov. 5, “The fabrication of T-shaped pump-less microfluidic biochips for coagulation test,” 2009 International Symposium on Mechatronic and Biomedical Engineering & Applications, Cheng Shiu University, Kaohsiung, Taiwan, paper no.: ID 08. [invited talk]

  61. 2009 Jyun-Jhih Luo, Song-Jeng Huang, Chin-Lung Yang, Dec. 11-12, “Portable Power-Saving Blood Coagulation Detection Devices for Remote Health Care Systems,” Biomedical Engineering Society 2009 Annual Symposium, National Yang-Ming University, Taipei, TAIWAN.

  62. 2010 S.-J. Huang, Y.-R. Jeng, Semenov V.I., Y.-Z. Dai, Feb. 9-10, “Tribological Property of Magnesium Alloy Based Metal Matrix Composite Materials: Particle Size Effect Study” Regional Conference on Mechanical and Aerospace Technology 2010, Bali, Indonesia, paper no.: 412. NSC project no.: NSC95-2811–E–194–001.

  63. 2010 Po-Chou Lin, Song-Jeng Huang*, Pin-Sen Hong, October 5-7, “Fabrication of magnesium metal matrix composites Al2O3p/AZ91D and their mechanical properties after heat treatment, ” 5th International Scientific and Technological Conference (Ther Tech Form’10), Nízke Tatry, Slovakia

  64. 2010 Song-Jeng Huang*, Zhong-Wei Chen, October 5-7, “Microstructure and grain refinement of AlN particles reinforced AZ91D Mg-based metal matrix composites, ” 5th International Scientific and Technological Conference (Ther Tech Form’10), Nízke Tatry, Slovakia

　

 

²        出版專書

  1. 黃崧任，「俄羅斯太空工業」，出版社 : 南宏出版社，89年09月。

  2. 黃崧任，「複合夾心板膠黏層的應力應變分析與其雲紋干涉之量測」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC89－2218－E－194－037，民國90年10月。

  3. 黃崧任，「複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測(1/2)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC90－2212－E－194－037，民國91年05月。

  4. 黃崧任，「襯套/扣件組裝於蜂巢複材結構之強度研究」， 行政院國家太空計畫室籌備處任務導向委託研究計畫期中報告，NSC91－NSPO(A)－PC－FA10－02，民國91年09月。

  5. 黃崧任，「襯套/扣件組裝於蜂巢複材結構之強度研究」， 行政院國家太空計畫室籌備處任務導向委託研究計畫結案報告，NSC91－NSPO(A)－PC－FA10－02，民國92年04月。

  6. 黃崧任，「複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測(2/2)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC91－2212－E－194－041，民國92年10月。

  7. 黃崧任，「鑽石薄膜應用於人工髖關節之磨耗分析與研究」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC92－2622－E－194－ 007－CC3，民國93年8月。

  8. 黃崧任，「複合夾心樑膠黏層的黏彈性質分析」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC 93－2212－E－194－010，民國94年8月。

  9. 黃郁文、林庭光、黃崧任、謝文馨、蔡孟勳，「微血液凝固分析晶片之研發」，大林慈院院內計畫成果報告，DTCRD 93-02，民國94年8月。

  10. 黃崧任，「車身結構輕量化技術開發及安全性驗證-子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(1/3)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC  93－2218－E－194－020，民國94年5月。

  11. 黃崧任，「車身結構輕量化技術開發及安全性驗證-子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(2/3)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC  94－2218－E－194－009，民國95年5月。

  12. 黃崧任，「車身結構輕量化技術開發及安全性驗證-子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(3/3)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC  95－2218－E－194－008，民國96年12月。

  13. 黃崧任，「奈米顆粒金屬及金屬機複材的製造過程及使用時的接觸磨潤參數之研究(1/3)」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC  96-2923-E-194-001-MY3，民國97年5月。

  14. 黃崧任，「生物複合材料的機械行為分析、製造與其特性化」， 行政院國家科學委員會補助專題研究計畫成果報告，NSC 96-2221-E-194-048-，民國97年10月。

　

 

²        專利

  1. 謝文馨,蔡孟勳,陳自強,黃崧任,林庭光,黃郁文, 「待測物檢驗法及其裝置」, pending (Jan. 2007): 096100258 / Taiwan R.O.C.; pending (Sep. 2007): 11/902376 / USA.

  2. 黃崧任,許暉侃,江堂豪, 「具有微粒摻雜的鎂合金複合材料」, pending (Jun. 2008): 97123518 / Taiwan R.O.C.; pending (July 2008): 200810133243.7 / China; pending (Jun. 2008):/ USA.

 

²        目前研究方向

(請參考http://www.me.ccu.edu.tw/labs/composite/myweb/index.htm)

　
bullet微、奈米複材研製
bullet複材光學量測
bullet複材計算分析
bullet奈米鑽石薄膜
bullet生醫工程

²        研究計畫

(一)、國科會

2010

計畫名稱

計畫內擔任的工作

起訖年月

補助或委託機構

執行情形

經費總額

血液凝固生物晶片之開發與應用(2/2)(100-2622-B-006-001-CC1)

共同主持人

2011/08/01 至 2012/07/31

行政院國家科學委員會

已預核

2,075,000

人體硬組織複合材料的微觀力學分析:以牙齒琺瑯質為例(99-2221-E-194-016-)

主持人

2010/08/01 至 2011/07/31

行政院國家科學委員會

執行中

634,000

血液凝固生物晶片之開發與應用(1/2)(99-2622-B-006-002-CC1)

共同主持人

2010/08/01 至 2011/07/31

行政院國家科學委員會

執行中

2,390,000

2000-2009

計畫名稱

計畫內擔任的工作

起訖年月

補助或委託機構

執行情形

經費總額

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－子計畫三：人體硬組織複合材料的微觀力學分析：以牙齒為例(II)(98-2221-E-194-003-)

主持人

2009/8/1 至 2010/7/31

行政院國家科學委員會

執行中

465,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－總計畫(II)(98-2221-E-194-002-)

共同主持人

2009/8/1 至 2010/7/31

行政院國家科學委員會

執行中

1,155,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－子計畫三：人體硬組織複合材料的微觀力學分析：以牙齒為例(97-2221-E-194-066-)

主持人

2008/8/1 至 2009/7/31

行政院國家科學委員會

執行中

489,000

生物組織之機械物理性質探討：奈米力學性質檢測及理論模式建立－總計畫(97-2221-E-194-065-)

共同主持人

2008/8/1 至 2009/10/31

行政院國家科學委員會

執行中

1,093,000

生物複合材料的機械行為分析、製造與其特性化(96-2221-E-194-048-)

主持人

2007/8/1 至 2008/7/31

行政院國家科學委員會

已結案

670,000

奈米顆粒金屬及金屬機複材的製造過程及使用時的接觸磨潤參數之研究(96-2923-E-194-001-MY3)

主持人

2007/8/1 至 2010/7/31

行政院國家科學委員會

執行中

1,366,000

病毒免疫生物晶片檢測系統之研究與運用–SARS及其它病毒之檢測－總計畫(3/3)(96-2221-E-194-054-)

共同主持人

2007/8/1 至 2008/7/31

行政院國家科學委員會

已結案

736,000

病毒免疫生物晶片檢測系統之研發與運用–SARS及其它病毒之檢測－子計劃三: SARS微流體晶片之設計與製造(3/3)(96-2221-E-194-003-)

共同主持人

2007/8/1 至 2008/12/31

行政院國家科學委員會

已結案

926,000

車身結構輕量化技術開發及安全性驗證－子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(3/3)(95-2218-E-194-008-)

主持人

2006/8/1 至 2007/10/31

行政院國家科學委員會

已結案

499,000

車身結構輕量化技術開發及安全性驗證－總計畫(3/3)(95-2218-E-194-005- )

共同主持人

2006/8/1 至 2007/12/31

行政院國家科學委員會

已結案

1,484,000

病毒免疫生物晶片檢測系統之研究與運用–SARS及其它病毒之檢測－總計畫(2/3)(95-2221-E-194-046-)

共同主持人

2006/8/1 至 2007/7/31

行政院國家科學委員會

已結案

851,000

病毒免疫生物晶片檢測系統之研發與運用–SARS及其它病毒之檢測－子計劃三: SARS微流體晶片之設計與製造(2/3)(95-2221-E-194-047-)

共同主持人

2006/8/1 至 2007/7/31

行政院國家科學委員會

已結案

926,000

車身結構輕量化技術開發及安全性驗證－子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(2/3)(94-2218-E-194-009-)

主持人

2005/8/1 至 2006/7/31

行政院國家科學委員會

已結案

482,000

車身結構輕量化技術開發及安全性驗證－總計畫(2/3)(94-2218-E-194-006-)

共同主持人

2005/8/1 至 2006/7/31

行政院國家科學委員會

已結案

1,196,000

病毒免疫生物晶片檢測系統之研究與運用–SARS及其它病毒之檢測－總計畫(1/3)(94-2213-E-194-047-)

共同主持人

2005/8/1 至 2006/7/31

行政院國家科學委員會

已結案

1,052,000

病毒免疫生物晶片檢測系統之研發與運用–SARS及其它病毒之檢測－子計劃三: SARS微流體晶片之設計與製造(1/3)(94-2213-E-194-044-)

共同主持人

2005/8/1 至 2006/7/31

行政院國家科學委員會

已結案

716,000

車身結構輕量化技術開發及安全性驗證－子計畫三：輕量化新型鎂基複合材料與複合夾心材料的製備及設計(1/3)(93-2218-E-194-020- )

主持人

2004/8/1 至 2005/7/31

行政院國家科學委員會

已結案

488,400

車身結構輕量化技術開發及安全性驗證－總計畫(1/3)(93-2218-E-194-017- )

共同主持人

2004/8/1 至 2005/7/31

行政院國家科學委員會

已結案

1,894,800

複合夾心樑膠黏層的黏彈性質分析(93-2212-E-194-010- )

主持人

2004/8/1 至 2005/7/31

行政院國家科學委員會

已結案

454,800

鑽石薄膜應用於人工髖關節之磨耗分析與研究(92-2622-E-194-007-CC3)

主持人

2003/6/1 至 2004/5/31

行政院國家科學委員會

已結案

386,600

複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測(2/2)(91-2212-E-194-041- )

主持人

2002/8/1 至 2003/7/31

行政院國家科學委員會

已結案

788,500

複合夾心板膠黏層的層裂分析與其破壞韌度之實驗量測(1/2)(90-2212-E-194-037- )

主持人

2001/8/1 至 2002/7/31

行政院國家科學委員會

已結案

679,300

複合夾心板膠黏層的應力應變分析與其雲紋干涉之量測(89-2218-E-194-037- )

主持人

2000/11/1 至 2001/7/31

行政院國家科學委員會

已結案

477,000

 

　 　(二)、其它機構補助申請

 

計畫名稱

計畫內擔任的工作

起訖年月

補助或委託機構

執行情形

經費總額
具微粒摻雜之鎂基複合材料的研發 主持人 2009/08/01 - 2010/07/31 日月星尖端生技輕金屬材料有限公司 執行中 540,000
美容用功能性合金的研發 主持人 2009/08/01 - 2010/07/31 纖適美得醫學美容診所 執行中 48,000
凝血及過敏生物晶片系統之開發 主持人 2009/08/01 - 2010/07/31 新應材股份有限公司 執行中 500,000

金屬上中下游競爭力提升輔導計畫-鎂合金無線網路販賣機殼蓋之模流分析

子計畫主持人

2008/08/07 - 2008/11/30

經濟部工業局/財團法人金屬工業研究發展中心/勝品科技股份有限公司

已結案

480,000

微血液凝固分析晶片之研發

共同主持人

2004/02/01 - 2005/01/31

大林慈濟醫院

已結案

194,000

襯套/扣件組裝於蜂巢複材結構之強度研究(NSPO(A)-PC-FA10-02)

主持人

2002/03/16 - 2003/03/15

行政院國家太空計畫室籌備處

已結案

445,000

　

 

²        指導研究生畢業論文

姓 名

論文題目

畢業年

1.王偉書

電子斑點干涉術量測鑽石打線機槌頭在高溫下變形情形
The Deformation Study of CVD Diamond Lead Bond Tool at Elevated Temperature Using Electronic Speckle Pattern Interferometry

民91

2.王文毅

複合三明治結構膠黏層的黏彈性質分析
Viscoelastic Analysis for Adhesive Layer of Composite Sandwich Structure

民91

3.劉孝偉

複合三明治平板黏彈性分析
Viscoelastic Analysis for Composite Sandwich Plates

民92

4.林華龍

ESPI 應用於襯套/扣件組裝於三明治蜂巢板之面外位移場研究
The Out-of-Plane Displacement Measurement of Electronic Speckle Pattern Interferometry on Sandwich Plates with Insert

民92

5.林雲志

含蜂巢式心材的複合夾心樑膠黏層的破裂力學分析
Fracture Mechanics Analysis for Adhesive Delamination in Sandwich Beam

民92

6.祝維信

鑽石薄膜應用於人工髖關節之磨耗分析與研究
Wear Analysis and Study of Diamond Film Applied in Total Hip Arthroplasty

民92

7.胡志凱

微電泳生物晶片檢測系統於免疫檢測之應用於研究
Investigation of Micro Electrophoresis on a Biochip Detection System Applied to Immunoassay

民93

8.邱林威

複合三明治平板黏彈性分析
Viscoelastic

Analysis for Composite Sandwich Plates

民93

9.劉耿甫

鑽石薄膜與金屬基材之人工髖關節磨耗研究
A Wear Study of the Diamond Film and Metal Substrate on Artificial Joint

　

民93

10.林鈺棠

數位斑點剪像術應用於含襯套/扣件三明治蜂巢板之面外應變場研究
Digital Speckle Pattern Shearography Applied to the Out-of-plane Strain Measurement in Sandwich Plates with Insert and Potting Materials

民94

11.劉彥甫

數位相移剪像術應用於含襯套/扣件組裝於三明治蜂巢板之面外應變場研究
Digital Speckle Pattern Phase Shifting Shearography Applied to the Out-of-plane Strain Measurement in Sandwich Plates with Insert / Potting Materials

民94

12.陳志亦

鎂基複合材料AZ91D/SiCp製備之研究
Processing of AZ91D/SiCp Magnesium Matrix Composite

民94

13,蔡富順

血液凝血生物晶片之研究
Investigation of Blood Coagulation Bio-Chip

民94

14.高銘澤

利用往複式擠型製備氧化鋁顆粒強化鎂基複合材料的研究
Fabrication of Mg-AlO Particle Reinforced Composite Produced by Reciprocating Extrusion

民95

15.張詠銘

微血液凝血生物晶片之研發
Investigation of Micro Blood Coagulation Bio-Chip

民95

16.蕭銘志

三明治板的挫屈分析-五層理論法
The Buckling Analysis of Sandwich Plates -Five Layers Theory

民95

17.葉宏仁

電子班點干涉術應用於含襯套/扣件三明治蜂巢板之三維位移場研究
Electronic Speckle Pattern Interferometry Applied to the Three-dimensional Displacement Measurement in Sandwich Plates with Insert and Potting Materials

民95

18.戴有志

鎂基複合材料AZ91D/SiCp之磨耗研究
Wear Study of AZ91D/SiCp Magnesium Metal Matrix Composite

民96

19.謝狄青

鎂基複合材料的製備及其三明治板機械性質之研究
Study of the fabrication of magnesium matrix
composite materials and the mechanical properties of its composite sandwich plates

民97

20.邱文甫

以RVE預測氧化鋁顆粒強化之鎂基複合材料機械性質之有限元素分析
FEM Analysis on the Prediction of Mechanical Properties of Mg-Al2O3p Particle Reinforced Composite from a Representative Volume Element

民97
21.洪品森 鎂基複合材料的製備及其熱處理後機械性質之研究

Study of the fabrication of magnesium matrix composite materials and their

mechanical properties after heat treatment

　

民98
22.王偉育

生物氧氣即時感測器之製作

In Vivo Real-time O2 Sensor

　

 民98
23.曹興景

生物複合材料的機械行為分析與製造：以鳳梨葉纖維為例

Mechanical Behavior Analysis, Processing of Biocomposites: an example of

PALF

　

 民98

　

 

 

²        服務事蹟

系所:

1.    招生規劃委員會召集人 (92學年度)

2.    招生規劃委員會委員 (90~91,94學年度)

3.    大學甄試入學考試委員 (90~93學年度)

4.    碩士班甄試入學考試甲組審查召集人(93學年度)

5.    碩士班入學考試委員 (90~94學年度)

6.    博士班入學考試委員 (90~94學年度)

7.    大學部班導師 (89~94學年度)

8.    圖書委員 (負責人,94學年度)

9.    教務委員會委員 (96~ 學年度)

10.    教務委員會委員召集人 (97 學年度)

校內:

1.    社團指導老師 (生命活泉社 90~93學年度、打擊樂社 91學年度)

2.    全校導師會議代表(89,94學年度)

3.    全校學生獎懲委員會委員(89學年度)

4.    帶機械系二學生參加2005 Moscow Aerospace School

5.    工學院院務會議代表(96~ 學年度)

6.    校務會議代表(96~ 學年度)

外校:

1.    碩士、博士學位考試委員(成大、交大、中興等校)

2.    專題演講 (成大、雲科大、吳鳳科大、青雲科大、正修科大、中華大學、交通大學等校)

3.    期刊論文審查 (中國機械工程學刊、中國航太學刊、Journal of Mechanics等)

4.      邀請俄羅斯科技大學 (MATI) 校長Anatoly P. Petrov 與副校長Alexander S. Grabilnikov來台演講並與國立中正大學簽訂合作備忘錄 (May 23-31, 2004)

5.    與成大呂宗行教授共同率領全台10位學生參加2005 Moscow Aerospace School

6.    行政院環保署九十五年度事業廢棄物處理審查委員（機械類、紡織類…）

7.    「中華民國留俄台灣同學會」發起人、籌備會主任委員2007

8.    「中華民國留俄台灣同學會」第一屆理事長 (06/2008-05/2010)

　

    　　　國際： 黃崧任 (Song-Jeng Huang) 參與國際交流活動

國際交流名稱

時間

地點

參與人員

交流內容

備註

中俄雙邊合作協議下（AGREEMENT on Scientific Cooperation between the Russian Foundation for basic research (FRBR) in Moscow and the national science council (NSC) in Taipei）短期訪問

Oct. 7-9, 2003

Moscow, Russia

◆Song-Jeng Huang
Russian State University of Aviation Technology (MATI):

bulletProf. V.A. Bunakov
bullet副校長 Prof. Alexander Grabilnikov

◆  Prof. Valery V. Vasiliev科學院院士（Corresponding Member of Russian    Academy of Science），
◆ Prof. Nikolay S. Azikov

擬定了下列的合作議題：
Proposals for Joint
Analytical and Experimental Research

總題： In Buckling, Post-Buckling and Design of Composite
Laminated and Stiffened Panels

國科會補助

俄羅斯科技大學 (MATI) 校長Anatoly P. Petrov 來台演講並與國立中正大學簽訂合作備忘錄

May 23-31, 2004

Taiwan, R.O.C.

Russian State University of Aviation Technology (MATI)
◆ 校長Anatoly P. Petrov
◆ 副校長Alexander S. Grabilnikov
國立中正大學：
◆校長Dr. Ren C. Luo
◆ Song-Jeng Huang

簽訂Memorandum of Understanding between National Chung Cheng University and "MATI" - Russian State University of Aviation Technology on Academic Exchange and Cooperation

國科會補助

俄羅斯科技大學 (MATI) 副校長Alexander S. Grabilnikov 來台演講並與國立中正大學簽訂合作備忘錄

May 23-31, 2004

Taiwan, R.O.C.

Russian State University of Aviation Technology (MATI)
◆ 校長Anatoly P. Petrov
◆ 副校長Alexander S. Grabilnikov
國立中正大學：
◆校長Dr. Ren C. Luo
◆ Song-Jeng Huang

簽訂Memorandum of Understanding between National Chung Cheng University and "MATI" - Russian State University of Aviation Technology on Academic Exchange and Cooperation

國科會補助

「莫斯科航太學校」大學生暑期研習營
(MOSCOW AEROSPACE SCHOOL' 2005)

Sep.5-16, 2005

Moscow, Russia

黃崧任與成大航太所呂宗行教授帶團，學生共十人（其中九人是經甄選獲補助，另一人是自費，中正機械系有二位大三同學獲選參加：林柏源、王崇豪）

一團共十二人；同時又與英國30位學生一同參加。整團成員於9月3日出發，並於9月19日抵台。

教育部補助

國科會延攬科技人才

Mar.20~
Aug.19, 2006

Taiwan

Semenov Vladimir
Institution: Creative Center of Ufa Aviation Institute

協助執行「輕量化新型鎂基複合材料與複合夾心材料的製備及設計(2/3)
095-2811-E-194-001-」

國科會補助

台俄NSC-RFBR雙邊合作計畫

Jan. 25- Feb. 08, 2008

Taiwan

Semenov Vladimir
Institution: Institute of Physics of Advanced Materials, Ufa State Aviation Technical University (IPAM, USATU)

依台俄雙邊合作計畫「奈米顆粒金屬及金屬機複材的製造過程及使用時的接觸磨潤參數之研究(96-2923-E-194-001-MY3)」來台執行計畫

國科會補助

俄羅斯科學院新西伯利亞分院採礦研究所(Institute of Mining of Siberian branch of Russian Academy of Sciences, Russia)所長來訪

Nov. 12, 2008

中正機械系Taiwan

科學院院士兼所長Viktor Oparin,
Prof. Anvar Chanishev
鄭友仁研發長、
馮展華系主任、
黃崧任副教授

機械系系主任簡報；討論未來兩所可合作事宜。

中正機械系補助

印度Prof. Sabu Thomas來機械系給專題演講，並討論申請歐盟跨國國際合作計畫事宜
(School of Chemical Sciences, Mahatma Gandhi University)

Dec. 17-18, 2008

中正機械系Taiwan

Prof. Sabu Thomas
鄭友仁研發長、
黃崧任副教授、
張怡玲助理教授

參觀機械系實驗室；討論未來申請歐盟跨國國際合作計畫事宜。

中正大學補助

　

²        語言能力

俄文：精通 聽､讀､寫，說-優

英文：精通 聽､讀､寫，說-優

　

　

bullet

大林召會

台灣眾召會全球資訊網

民雄召會

　

共同指導

　

　

        方鴻明 醫 師